DIY Fringe Bowl
Have you noticed fringe is everywhere in home decor these days - furniture, pillows, rugs, accents and especially wall hangings! Adding fringe to decorative items is a great way of changing or introducing a new look for the season!
One way could be to use jute twine to coil into a bowl and then add a handmade fringe around the top edge! This would be so cool!
Start with a plastic bowl for shaping. I got this one at Target for 79 cents! And wrap it in strips of parchment paper instead of plastic wrap that will sometimes stick or melt and make the inside finish shiny.
Then add quick drying fabric glue to the end of a large roll of jute twine (don't cut) and begin twirling it in a tight coil circle.
Place the coiled twine circle on top of the parchment covered bowl and continue adding fabric glue as you twirl the twine around. Add lines of glue along the twine as you are coiling it around the bowl base, making sure to keep the twine even and the circle flat.
Continue coiling and gluing the twine around the bowl, holding the twine firmly in place as you are waiting for the glue to dry ( a minute or two) until reaching the end of the bowl.
To finish, cut the twine at an angle, adding a bit of glue, while blending and smoothing into the edge. Gently remove plastic bowl from coiled twine bowl.
Seal the bowl with a coat of mod podge to make the fibers stronger and to control the jute twine threads.
To make the fringe, wrap a piece of jute twine around the edge of the finished bowl, overlapping the ends and cut off. Measure the height of the side of the bowl (8") and begin cutting eight inch strips of twine. Then take each twine piece and fold in half forming a loop on one end. Make a lark's head knot by placing the loop over the long piece of twine. With the loop hanging down over the twine, pull the two twine strands through the loop around the twine, pulling strands tight into a knot.
Continue making larks head knots around the twine . . .
until twine is completely covered.
Unravel the twine strands and fluff using a comb or stiff brush. Attach fringe to edge of bowl using a quick grab, strong fabric glue. Use clothespins to hold in place until glue is completely dry.
You can insert the plastic bowl back in to use with food or wet items. It's a perfect fit!
What a fun way to add a decorative look using fringe! Ideal for showing off my faux figs for Fall!
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Gail@Purple Hues and Me on Aug 27, 2022
Gee, Beth! I can't thank you enough for your kind words! Enjoy making this basket! It's perfect for Fall! 💜
-
-
-
Gail@Purple Hues and Me on Nov 04, 2022
Thanks, Hope! Enjoy and have fun!
-
-
Frequently asked questions
Have a question about this project?
How do you keep the parchment paper in place while you work? It's slippery and won't hold tape.
How can u erase projects to do itema