How to Build a DIY Stone Fireplace

8 Materials
$1100
4 Days
Medium
From a blank wall…to a beautiful focal point

Have you ever looked at a blank space and thought that it needed something more? That was this wall. It was somewhat small with two windows and was the only place for the television to go in the room. So, naturally it seemed like the perfect place to add a fireplace.

The wall before…

The thought of building a fireplace might be intimidating, but if you can build a box, you can build this fireplace!


To get started, you will need:

Materials:

  • (1) 2″ x 12″ x 10′ for the hearth
  • (11) 2″ x 4″ x 10′ for framing
  • 1.5 sheets of 1/2″ thick 4′ x 8′ plywood
  • Tile (enough to cover your size surface)
  • (9) tubes of Liquid Mortar
  • Oak beam for the mantle
  • Salvaged wood for the hearth
  • Electric Fireplace Insert


Tools:

  • Drill
  • Level
  • Speed Square
  • Circular Saw
  • Tile Saw
  • Caulk Gun for Liquid Mortar


Directions:

Building the base:

To begin, we figured out how much space we wanted between the windows and the new fireplace. In our case, we wanted our fireplace to be 74″ wide (this will vary depending on your space and insert). We subtracted seven inches for the sides to be build out of 2x4s as well as 2 inches for the substrate and tile.


First, we cut two 2x4s down to 64″ long. Then we attached one board horizontally to the wall studs making sure it was level and was at the height that we wanted the mantel to sit on. Next, we attached the second board to the base of the wall making sure it was in line with the first board.

We had mounted our first 2x4s to the wall

Then, we used 2x4s to create two identical rectangles for the sides. We made sure that they were exactly the height of our mounted board. Also, we made sure that the fireplace insert had enough clearance per the instructions. Then, the rectangle boxes were attached to wall and the existing boards to create the sides.

The sides are just rectangles made out of 2x4s

We then built another square out of 2x4s to fit inbetween the sides as a front. Make sure it is square before attaching it.

You should have 3 boxes attached together to form the base frame.

Building the Upper Frame:

The homeowners wanted their fireplace to go all the way to the ceiling. So, we created another box using 2x4s making sure it was securely attached in the ceiling and to the wall studs.

The upper frame

Next, we added some extra supports to make hanging the television easy and solid.

Supports for the television

Framing the Insert:

Finally, it was time to frame in the fireplace insert. Be sure to follow your instructions for your fireplace. We simply attached some 2x4s to create the width we needed. Next, we added cross pieces for the insert to sit on top of.

We added 2x4s to support the fireplace insert on all sides.

Building the Hearth:

We were able to use just one 2×12 to create the hearth. One piece was attached on each end and then the front piece was attached.

The hearth was constructed out of a 2×12

Once the framing was done, it was finally starting to look like a fireplace.

Finished Framing

Finishing:

Now, the next steps really depend on what you want your finished fireplace to look like. At this point you could add shiplap, paneling, etc.


We had to add a backer board since we were using tile. Our particular tile allowed plywood as a substrate. Make sure to follow the recommendations for whichever product you use.

Plywood Wrapped Fireplace

Note: We did not wrap the hearth with plywood since the stone could adhere directly to the 2×12 frame.


We used a tile saw to cut the tile to the lengths we needed and used the caulk gun to apply the liquid mortar to the backs of the tile. This process was faster, cleaner and easier than having to use traditional mortar.

The stone tile going up

We sat an old barn beam on the base frame to create a mantle and the hearth top was some reclaimed barnwood that we sanded and stained. They were attached with glue and screws.

Finished Fireplace
Reclaimed Hearth
Before and After

I love the transformation!!! I hope this gives you the confidence to try it too!

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Becky | Boxwood Design Co
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 5 questions
  • Angela reeder Angela reeder on Nov 09, 2021

    I love the stone tile u used. Can I asked where you bought and the name of it please

  • Joan Joan on Feb 10, 2023

    Can you tell me the brand/model, etc. of the electric fireplace insert you used. It is beautiful. Thanks.

  • Why didn't you add an electrical box behind the tv while the wall was still open? Drop those cords, and a headache senario will begin!

Comments
Join the conversation
2 of 37 comments
  • Gig69451122 Gig69451122 on Feb 12, 2024

    The fireplace is stunning! Omg the amount of work to make that happen. As a decorator. It still consternates,me, why t.v.s are placed above the "focal points" of rooms? Even interior decorators, when taking "after photos". Are now incorporating chosen (live landscaping channels.) Instead of a big black hole above the fireplace.

    Whether it is publicly applauded? Decorators need to try & pick a wall, then set the furniture appropriately.

  • Jenny Jenny on Aug 19, 2024

    I agree about the TV placement. It's too high for comfort. I built something very similar 44 years ago but my area above has a drinks cupboard with hinged framed print in front. I had to backwards plan from the tile size ( random stone tiles ) It went out of fashion but now it's back I believe. Oh, did I say I was 5 feet tall and mid-pregnancy at the time. Hubby always let me get on with it.🙄😂

Next