DIY Woven Yogurt Jar Hanger

So let's get started!

Just so you know, I am not a precise crafter. Many times I just eye-ball measurements and this is one of those times! The Oui glass jar is wider on the bottom and gets narrower as you move up to the opening, so exact measurements can be difficult. Anyway, turn the jar upside down and measure from slightly inside the bottom edge down to the top of the jar (which is now the bottom) adding a couple of extra inches (10") and then double the amount of the cord (20") - and fold the cord in half. The folded cord is 10" long. I used a ruler to measure and cut the cords.

I initially thought if I glued down the folded cord in clockwise positions, and fill in-between, I would have an equal amount of spaces to glue on the cords. But once I got started, it didn't quite work out that way. As you can see, I glued the folded cords at the 12, 3, 6, and 9 positions.

Then fill in between with more folded cords glued on . . .

until all the open spaces between the sections were filled with glued double cords. You can see that there were gaps showing in some of the sections. I should have just started at the twelve o'clock spot and glued the folded cords, side by side, all the way around. Oh well!

Next, measure around the glass jar (circumference) at the widest spot on the bottom by loosely wrapping the cord around twice and then folding it in half. Because the glass is larger around the bottom and gets narrower toward the top opening, I measured each cord separately and didn't cut all of them at once.

Begin weaving each row near the same area - first, by picking up one folded glued cord away from the glass and gluing down the cord under it horizontally. Then begin by weaving over and under the vertical cords as you move around the glass jar. The horizontal cords should end at the place where you began - gluing in place (under the vertical cords) cutting off any excess cords.

Start the next row adjacent to the beginning row and continue weaving over and under, moving around the jar, as before. Be sure to lift the folded cord up as far as you can to avoid unnecessary gaps in the weaving.

As you weave, glue cords to glass and pull straight in place until set.

Continue weaving each row, as before until . . .

reaching the top glass edge, then turn glass jar right side up and smooth up the cords.

Glue down the smoothed cords over the edge of the glass and let dry.

To add hanging cords, measure how long you want them to be and double the cords. Decide where the hanging cords should go (equally on jar). Then thread the cord end through a wide eyed blunt needle and insert through top woven double cord, pulling needle through to attach hanging cord. Double cord and glue in place, making sure vertical cords are glued down, too. Repeat for second hanging cord.

Once the hanging cords are secured and glue is dry, cut off excess cords around jar.

Tie cords at the top for hanging.