Wooden Toilet Paper Storage
2 Materials
$20
3 Hours
Easy
I did this to have a place to store the rolls of toilet paper, as I hate the bags that they come packed in. You can find a lot more details in the article on my blog, listed at the end.
I used a 4 cm thick beech wood panel which I cut square, 20 cm by 20 cm. I marked the center of it by intersecting it's diagonals
I drilled a 30 mm hole in the center, to fit a round bar that I purchased separately. The hole was not drilled all the way, but just halfway through
I glued the rod in the hole and sanded everything smooth. The sanding needs to be as smooth as possible, so the varnish seals the wood perfectly
I finished everything using water based stuff: stain, primer and varnish.
The toilet paper holder can store up to five standard rolls.
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?