How to Make an Easy Snowman Wall Decoration With Christmas Ornaments

$35
1 Hour
Medium

This post contains editorial samples and/or affiliate links to products I recommend. While this adds no additional cost to you, I will earn a small commission on any sales made.


Our Easy Snowman Wall Decoration with Christmas Ornaments was featured on Countryliving.com (Squeal!)
There’s so much I love about Christmas.
This year we began decorating well before Thanksgiving because I wanted to enjoy the warm, cozy, festive feel longer.
While the house, both indoor and outdoor, looks festive, the long wall leading to the front door has always looked bare.
But that changes this year onwards.
How to make an easy Snowman Wall Decoration with Christmas Ornaments


Being in South Texas means a white Christmas is only something we dream about but that never stops us from reminding ourselves that we can have our own snowmen.


Sure, they may not be made of snow but we can be creative!


(Who remembers our DIY Christmas Snowman Fridge?)


With a few ornaments, Krazy Glue,

and patience,we now have a classy Snowman wall decoration that welcomes guests coming in.


I promise this is an easy project to take up, with a beautiful end result. Krazy Glue makes it so easy to bond anything together so think BIG!

Materials required:



109 Plastic/Shatterproof Silver Christmas Ornaments (approximately 1.5″ in width)



1 orange C9 light bulb cover (from a LED set) or 1 orange C9 light bulb



1, 2 pack of Krazy Glue All Purpose Precision Tip One Drop Application in a Stay Fresh Container



2 containers of Krazy Glue All Purpose No Run Gel Precision Tip



1 small/children’s winter hat



1 piece of fleece, cut to 3.5″ x 36″



Faux Greens



Gold Floral Balls



Plastic Trash Bag



Scissors



Bread Tie

Lay a plastic trash bag on a flat surface to protect it.


Remove all strings/hangers from the ornaments.

Begin at the top of your snowman’s head.


Lay out five rows of bulbs in this order 2, 3, 4, 3, 2.


Carefully make sure all the bulbs touch.

This is important.


Use Krazy Glue All Purpose Precision Tip One Drop Application to drip one glue drop at the contact point where the two bulbs meet.

Let the bulbs set for a few minutes.


Continue to add bulbs for the body, 8 rows of bulbs with 5, 6, 7, 7, 7, 6, 5, 4 bulbs in each row respectively.


Make sure the bulbs touch and butt them up to the bulbs of the head.


Continue to use the glue to add a drip at the contact point of each bulb.


Wait 2-3 minutes to ensure it has set well.


Begin to add the second layer of bulbs on top of the first.


Remove all the strings and the plastic ends from the bulbs.


It’s easiest if you just leave the string on the bulb and use it to pull away from the bulb.


It pops right off.

Place the second layer of bulbs in between the first layer of bulbs.


You’ll need the following in each row: 1, 2, 3, 2, 1 and that should give you the head and neck of the snowman.


For the body, you need the following number of bulbs in each row: 4, 5, 6, 6, 6, 5, 4, 3.

Working with one row and one bulb at a time, place the bulb on the first row and add a dab of Krazy Glue All Purpose No Run Gel Precision Tip Glue to the contact points (bottom of the second row of bulbs) of the bulbs.


Continue, one bulb at a time, one row at a time until your snowman is complete.


Once you’ve glued the bulbs on the bottom, look at the top and add a drop of Krazy Glue All Purpose Precision Tip One Drop Application in a Stay Fresh Container glue where the bulbs touch within the 2nd row.

Add Krazy Glue All Purpose Precision Tip One Drop Application in a Stay Fresh Container glue to the base of the orange bulb cover and add the nose.

Allow it to set again.


To assemble the hat:



Slide the hat onto the snowman’s head once dry.


Roll up the brim and tuck some greens and faux gold berries into one side of the hat.

To create the scarf:



Cut 2″ slits into the short end of the fleece

and tie a knot using a slip knot to create a frayed scarf.


Wrap the scarf around the snowman’s neck.


Add a small bread tie hook or wire to the back of one of the bulbs to hang the snowman. Affix with Krazy Glue All Purpose Precision Tip One Drop Application in a Stay Fresh Container.


And there you have it, your adorable wall Snowman decoration, once finished, will stand approximately 20″ x 12″ in dimension.

You can even hang him on your door, instead of a wreath.

Now wasn’t that easy?


A snowman wall decoration made with Christmas ornaments and Krazy Glue.


Crazy, creative and quite an out-of-the-box idea, right?


I’d love to hear from you. Hop over to chat with me on Facebook and/or Twitter

Marina
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
 4 comments
Next