White plastic bucket label?

Spray paint the bucket (or that spot) with white spray paint made for plastic.

Hi Toni, I agree with Chloe, spray paint the bucket white, over the black print.

Sometimes the black print can be removed with alcohol. Start with rubbing alcohol then if you have it try denatured alcohol.

Hello I might suggest lighter fluid and a magic eraser.

Hi Toni. I was going to recommend WD-40. That's what car dealers use to remove glue and price /info papers from the car windows. I read that you already tried it though. So, as a last resort, I would try the paint. Good luck Toni. I hope you are safe and well.

HI THERE,

If it won't come off, don't worry, Paint it out or cover it with tape or bind the pot with tape as part of the decoration, or put a sticky something over the top etc. Good luck!

Another thought if you don't want to paint would be White Out, sold in office supplies, this would also depend on the size of the label. It is the stuff used to cover up on paper.

Acetone or nail polished remover.

Acetone definitely!! If that doesn't totally work, use nail polish remover and a polymer eraser while the nail polish remover is wet. Here is my post that may help you:

https://karupp-did.net/how-to-remove-sharpie-from-plastic-school-folders/

Then after you remove the black, if you were thinking about painting, use a plastic spray paint. Good luck.

I know this post isn't your exact situation but it may work applied to yours.

Have you tried cleaning it with alcohol?

Try sanding it off

Use Acetone, the kind you purchase in the hardware store

Nail polish remover?

Sounds like the warning label is printed on the bucket, I have a couple of those myself. You could always paint them here is some info for you to do that

https://www.youtube.com/watch?v=n5BdxdAAkHI

https://www.youtube.com/watch?v=1cZn1eQihEM

Alcohol may work

Hello there,

Stick a White Label over it or paint over the label with Stain Cover or maybe use Copydex correction fluid.

Hi Toni, you can lightly scrape the black ink off with a sharp knife, you should not have to scrape too hard, try a bit of alcohol on any leftover spots of ink.