Upcycled Burnt Out Light Bulbs

1 Material
I love the big round shape of these light bulbs. They are from our bathroom light fixtures. When they burn out I pull them apart to make hanging vases out of them. They make such a nice hanging display when grouped together. I can't wait to have a bunch of them to cover a small wall.
You will need a burnt out light bulb, wire, needle nose plyers, and for safety a heavy duty glove. I wore safety glasses as well incase any glass went flying.
I removed the metal backing by pulling it out with needle nose plyers. You can see more instructions on my blog.
Once the center pin/plate is removed there is glass backing that you will chip & break away at with the plyers.
Now you will be able to get inside the light bulb & pull the guts out by breaking it away from the light bulb.
Shake all the leftover glass pieces out of the bulb and it's ready for the wire.
I picked up wire from the Dollar Tree and wrapped a piece around itself on one side and then bringing one of the strands around to the other side and looping it through to create a hanging wire.

Suggested materials:

  • Wire, glass light bulb, plyers

Desiree G
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

  1 question
  • Laurie Laurie on Sep 23, 2016
    I am wondering if you could put colored sand and small shells for another look?

Comments

Join the conversation

4 of 31 comments
  • Pam Pam on Apr 19, 2019

    Beautiful

  • Kim Kim on Apr 19, 2019

    Will do this! Just replaced two bulbs from my vanity. Ready for another to blow to “even” it out to a set. THIS brilliant project of yours is one I’ve been looking for. Thank you!

    • Desiree G Desiree G on Apr 20, 2019

      Glad you like it & that you’ll be trying it! Thank you!

Next