Any ideas to how to turn a deep glass salad bowl into a vanity basin?

Hi Jean, here are some instructions for turning your glass bowl into a vanity basin. Good luck with your project and stay well. How to make a vessel sink from a serving bowl | Bathroom ...

www.pinterest.com › pin

We figured out how to make a vessel sink from a serving bowl. ... TLC Family How to Turn a Bowl into a Sink ~Id love to eventually use ... Converting or repurposing an old chest of drawers or cabinet into a bathroom vanity not only ... I'm losing my mind trying to find a bathroom sink deep enough, wide enough, and sturdy ...

This link may be just what you need:

https://www.oldhouseonline.com/repairs-and-how-to/create-a-vintage-inspired-vessel-sink

For glass you would need to use a carbide hole saw.

https://www.littlevictorian.com/how-to-make-a-vessel-sink-from-a-serving-bowl/

You just need to drill a hole in the bottom the same size as the drain hole. Use a drill bit made for glass and drill it while running water over it

Hi Jean, you'll need to use a special carbide glass drill bit to make a hole for the drainage hole. This video will show you how to do it - https://www.youtube.com/watch?v=U_NtTBTGp20

Buy cutting a hole in the base of the bowl with a diamond tip hole saw.

Hello,

First of all it would have to be toughened glass to consider using it, otherwise it won't stand up to the heat changes etc. Otherwise just place on top of counter as with old style Jug and Basin................

Here's s link in how to drill into glass, although it is a small hole, you might be able to slowly and gradually enlarge it to the drain size. Your salad bow may be able to take the procedure very well, please wear safety goggles.

https://www.wikihow.com/Drill-Holes-Through-Glass

I'm not sure the salad bowl glass is durable enough - sounds a bit dangerous. It won't be tempered and could break easily.

I'd be afraid it would break.

I feel like a salad bowl wouldn't be thick or strong enough glass for it to be used as a sink.

I found this on how to install a vessell sink: https://www.youtube.com/watch?v=y6s9bqNqxEM

Hello Jean, this is a great article on turning a bowl into a sink, it has a lot of helpful information you will need, hope it helps you out

https://lifestyle.howstuffworks.com/crafts/recycled/make-bowl-sink.htm

You will need a diamond drill bit to create the holes needed for the drain area. Check at Lowes or Home Depot. You risk breaking the bowl, but it can be done!

Hi! If it were metal, I might give it a try. But, honestly how well is it going to hold up to daily use? I would prefer that type of sink be something that wouldn't be easy to damage. Stay well!

Hi Jean, you will have to drill a hole for the drain, hope this helps you out,

https://www.wikihow.com/Drill-Holes-Through-Glass

https://www.youtube.com/watch?v=zAePwp32Yhg

Is it metal?