Soda Can Singing Angels
by
Nancy at Craft Your Happiness
(IC: blogger)
We made soda can angels when my kids were young (in the 90s) and I wanted to do an updated version. I made a variety of them using different inexpensive items for the wings, halo, hair etc. You can view all of them on my site.
SUPPLIES
Clean your can and carefully remove the tab.
Paint the can with about three coats of spray paint, allowing to dry well in between each one.
Paint on the face color and the lips. I used a sharpie marker for the eyes.
Very carefully and SLOWLY bend over the top of your can as shown. Just enough so it faces forward but won't tip over. (more details on my site)
For this angel I used a paper doilie cut in half for the wings. On my site article you can see wings made from a variety of different things including ribbon as shown below.
This is another type of angel. There are other styles on my site.
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published December 1st, 2015 9:00 AM
Comments
Join the conversation
2 of 29 comments
Frequently asked questions
Have a question about this project?
Most definately will try this project. Have a 16 pc choir that I would like to make "angels" representing us to an outgoing choir director, but don't know how to display them properly. Any ideas?
That is so cute! What an imagination!
Where is the link to your web page?