496 Views
DIY Ribbon Holder
![Linda kelley](https://cdn-fastly.hometalk.com/media/profile/2017/01/29/1429475_7.jpg?size=91x91)
by
Linda kelley
(IC: blogger)
3 Materials
Easy
I really need a ribbon holder to hold my ribbon! After looking at them online, It looked like I could try and make it myself.
I had some left over wood in the garage. All you need is one piece for the back, mine is 21" long x 7 1/2" wide. Then you need 2 sides, mine is: 4 1/4" x 7 1/2".
I had some left over wood in the garage. All you need is one piece for the back, mine is 21" long x 7 1/2" wide. Then you need 2 sides, mine is: 4 1/4" x 7 1/2".
Once the 3 pieces were cut, I put them on each side, so I could figure out the next step. I used 1/2" dowels (only because I already had them on hand), put one ribbon on to judge where I want the holes. I did this for the second row also. But I didn't make them the same as the first row because I wanted to allow for different ribbon. After I marked where I wanted both rows, I clamped them together to make my holes. This is a good way to do so they are align up with each other. Then I made the second row the same way.
Then I put on the wall....and it's done! Check out my other projects at: kelleysdiy.com
Enjoyed the project?
Suggested materials:
- Wood 3/4" (Home Depot)
- Dowels (Walmart (best price))
- White Paint (Walmart)
![Linda kelley](https://cdn-fastly.hometalk.com/media/profile/2017/01/29/1429475_7.jpg?size=91x91)
Want more details about this and other DIY projects? Check out my blog post!
Published April 2nd, 2016 5:58 PM
Frequently asked questions
Have a question about this project?