Patching a Varmint Hole in House Siding
4 Materials
$30
2 Hours
Easy
Some kind of filthy, crawling beast chewed into the side of our house. I blame the neighbors (more on that in the blog post). Either way, I gotta fix it. We have some wicked things in Arizona that I prefer not to have colonize the attic.
Since the siding is created from a 4x8 T-111 wooden sheet, I didn't want to tear off a big chunk and pull all three electrical conduits and their wiring out to replace it. I measured the width of one of the aesthetic "planks" formed in the sheet and cut a thin piece of plywood to size.
Rather than measure the roof angle, I transcribed the angle of the roof-line cut using a compass.
Once I lopped the angled tip off the board, I screwed it to the face of the wall, over the hole. It's a temporary step, just to hold it in place.
Have you ever used on of these? An Oscillating Multi-Tool is like power scissors for cutting wood. It uses a thin, vibrating blade that slices a narrow, controllable line. Mine is a handy cordless model. I keep finding new uses for it.
I buzzed the saw along the edge of the board, tracing along the edge, following it like a pattern.
The damaged piece as well as my fresh cut plank popped free in one, screwed together chunk.
I slipped the patch into the perfectly sized hole and screwed it into place. There was framing behind it to hit with the screws, otherwise I would have had to add some strips of wood.
I still don't know what gnawed that hole.
A bit of caulk over the seams and the recessed screw heads sealed it up.
I primed it to seal everything up and help protect it from the desert sun.
I took the scrap to Home Depot and had the faded paint color matched with their magical gizmo. A couple coats of decent paint blended the repair right in.
Done deal! You can hardly tell there was a patch done. I painted a couple of the conduits as well.
The cool thing about this project is the act that I never had to crawl in the attic to do the repair. I did get up their in the beginning to look for evidence of the creature, but didn't see anything. Check out the blog post for more info,... and why I blame the neighbors.
Want more details about this and other DIY projects? Check out my blog post!
Comments
Join the conversation
3 comments
-
Great patch job. No link to the blog. I'm curious why you blame the neighbors!
-
That hole looks a lot like ones I have seen before. A woodpecker, the Northern Flicker to be exact, may be the culprit if you saw no rodent droppings inside. http://fraservalley.wbu.com/content/show/7458...
Frequently asked questions
Have a question about this project?