Outdoor Solar Lights From Leftover Materials
by
Missy Burch
(IC: homeowner)
5 Materials
$4
2 Days
Easy
I cut down some old saw horses & decided I'd use the pieces to make some solar lights for my front porch area. They came out almost identical sizes & shapes, so I painted them all black, drilled my holes & it was a very simple project, made with stuff I had on hand, other than the lights. It cost less than $4.
You will need your heavy duty drill & a large bit to make the hole for the lights to drop into.
I take off the poles the lights come with- that's your call obviously.
Here are my 4 blocks, already painted & sealed, holes drilled.
Here's the drilled holes
Here you can see how the lights fit nicely into the blocks.
I used outdoor silicone to hold the lights in place, since it's water/weather proof- as you can clearly see on the label.
Here is my cheap black spray paint from Lowe's.
Here is my sealant- also from Lowe's. As stated- super easy project.
The finished project, outside at night. With my porch light on one of them doesn't want to light up for some reason.
Enjoyed the project?
Suggested materials:
- Krylon clear spray paint (Lowe's)
- Project source black spray paint (Lowe's)
- GE clear silicone (Lowe's)
- Drill & large drill bit (Lowe's)
- Solar lights (Dollar Tree)
Published May 15th, 2018 10:02 PM
Comments
Join the conversation
2 comments
Frequently asked questions
Have a question about this project?