Two Tone Decking Coffee Table
Composed using various species of recycled decking timbers and a reclaimed steel frame this coffee table will be right at home in your home! It is finished with Danish oil giving it style while maintaining its ‘one-of-a-kind’ character.
*Dimensions
- 875mm (length)
- 825mm (wide)
- 455mm (height)
Find your pre made frame from the generous curbside :)
Remove existing table top and clean up frame with sand paper.
Applied new paint (I chose gloss white).
Select decking offcuts.
Biscuit, glue and clamp.
Give table top initial sand and cut to size.
Further sanding and cut edge profile (trimmer/router).
Fix frame to underside of new table top.
Clean and wipe down table top in preparation for Varnish.
Apply 3 coats of Danish Oil - allowing a few hours for drying time between each coat.
Ready for use :)
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
-
Carol Cole on Aug 18, 2019
OMGOSH , I just love the tones of it. It is beautiful.
-
Frequently asked questions
Have a question about this project?
Hi Really love your table you mentioned varnish then used Danish oil. Is Danish oil a varnish as I would want an heat resistant varnish in case of accidents . Is this heat resistant . Thanks