How do I go about fixing spaces in between brick?
What do I need to do to go about fixing gaps in between layered brick. I do not need it to look perfect, just decent to fill in those gaps. I am mot very DIY literate.ANY advice would suffice! TYIA
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Front door (metal) has gaps between the door and frame. How do i fix
Our front door (metal) has a lot of gaps between the door and the frame allowing cold or hot air to come in. How do I fix that?
How do I go about getting broken skeleton key piece out of the lock?
Our house was built in 1927. We’ve spent a lot of time trying to keep all accouterments period specific. One of our wooden doors has used a skeleton key for decades... See more
Your photo is from outdoors. For this and at the base of your foundation you DO need a proper fix. What is needed is called "brick repointing" and means that a mason comes back and scrapes out all the loose/crumbling mortar and then replaces it with new. This is NECESSARY as the current situation will allow water to permeate the foundation causing damage. Most especially if your area freezes/thaws it must be done before this coming winter. If the foundation fails, the house fails!!!
Karyl: I've done this myself. (It probably saved my house from flooding during Hurricane Harvey.)
https://www.thespruce.com/how-to-tuckpoint-mortar-joints-1824715
We had a similar situation on the chimney (also brick) above the roof. Weather, freezing and thawing compromised the bricks and mortar. Since neither of us could climb up there and do the job, we choose to have the chimney taken down.
In your pictures the worst of it is at the base, there are still some "gappy" spots on up the wall.
Since you are not too diy savy, I would suggest calling in professionals for this masonry problem, get their advice and free estimates evaluating your situation. Call in multiple professionals, let them tell you what needs doing. Take their advice and go from there.
here is some info for you
https://www.homedepot.com/p/Quikrete-10-oz-Mortar-Repair-Sealant-862009/100318502
I probably agree with the professional help advice! My mom's name is also Karyl - spelled the same way! Don't think she's ever met another karyl with that spelling!!
Here are two videos to walk you through this project: https://www.youtube.com/watch?v=KhE7kYa3IqQ
https://www.youtube.com/watch?v=lsRxAr2M5XU
It needs repointing. This link gives great instructions:
https://www.thisoldhouse.com/masonry/21016676/how-to-repair-mortar-in-a-brick-wall
You can buy masonary grout from local building store. Mix it stiff, into a paste that you can handle with your hands. Push in with hands.
I would ensure the loose mortar is cleaned out. Then I would buy a tube of concrete caulk and fill the gaps. The other option also mentioned is mixing grout and stuffing into the gaps. However, I think the caulk is a lot less work. Smooth it with a wet finger to match existing mortar style.
My go to is Quick set Mortar. Comes in a box. Mix small amounts at a time as it DOES set fast. There are tools to force the mortar into the cracks but sometimes your fingers work just as well. Use a trial to catch what is falling off of your tool. Check the box stores to get a and chisel to clean out any loose mortar. Mix a small batch of mortar with water. Wet the existing brick with a hose. Push mortar into the void in the brick and use a pointing tool to smooth out once the crack is filled.
It appears that the problem could be bigger then sagging bricks. You need to call someone to check this out. I have seen commercials for Ram Jack and they deal with foundation problems but they aren't cheap.
You can most likely repair this following Em's advise. Be careful to first wet your existing brick before mortaring, or the mortar will absorb too much moisture from surrounding brick, cracking or settling, in the process.
Is it structural or a veneer? If it is built onto your foundation, you just need to chisel out the old stuff and apply new mortar. I would also check why it became that way. Excessive run off from a poorly placed down spout or diverting the water would keep it from further damage. Good luck and stay safe!
Hello there,
If you want PROFESSIONAL LOOK! Ask a Bricklayer to "Repoint" wall for you. It will be uniform and you can have a choice of type of Pointing.
I think this will help you https://www.youtube.com/watch?v=KhE7kYa3IqQ
it needs to get cleaned out properly that means removed pieces left and re-pointed again
Hello,
If I were you I would call in a Bricklayer and have him/her Re-point the area. You could rake the joints out and doo it yourself, but you could end up with a bit of a messy look unless you are good at it.