Hotpress/Corner Cupboard Revamp
Ok so originally this was MDF (brown wood) I papered over it because I got fed up looking at the brown - but never liked the paper I used (a friend gave it to me and I didn’t have enough to do the full cupboard - which annoyed me)
so I decided to redo it!!!
I just used a plain cream paper as I had none left of the patterned paper
This cupboard holds our hot water cyclinder but the Carpenter never made it big enough to use it for other storage!!!
I bought this paper from amazon it is already sticky on the back - I thought it would be much easier than having to paste normal paper!!!!
it was a bit trickier than I expected but I got there in the end!!!
i just measured it & cut it... carefully then place it and make sure it was in the right position!!!!
This was the hardest part to try Paper the door but also match it with the paper I’d already put up over the door!!!!
i also chose to paper over the existing paper as it was really really stuck to the mdf !!!!
And here it is in all its glory!!!!
I used 5 rolls - which I was as surprised the cupboard was even that big!!!!
Here’s the side - which was super easy because there was no door - just measure cut & stick it up!!!!
with a bit of patience - as it did take longer than expected!!!!
Comments
Join the conversation
-
Fantastic idea and phenomenal execution 👍🏽
-
I get paid over $90 per hour working from home with 2 kids at home. I never thought I'b eable to do it but my best friend earns over 10k a month doing this and she convinced me to try. The potential with this is endless. Here's what I've been doing,
Frequently asked questions
Have a question about this project?