How to do MDF flooring in the Bathroom?
I want my bathroom flooring with MDF wood. Some of my friends suggested me this. Actually I have less idea on this. Even I don't know the basics difference between HDF and MDF. Can anyone tell me the total budget of doing a MDF flooring for 30-40 sq ft area?
I read some websites and blogs
More Links and videos are welcomed for a better outlook
Thanks in advance
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
If I was going to do a bathroom should i put black tile in?
We have a bathroom that we are going to put black tile in
Can MDF Bathroom Cabinets Look Like Stained Wood?
I have old builder grade bathroom cabinets and want to update them. I thought they were wood that had been painted, but when I removed the paint from one of the drawe... See more
Hi Sussane. MDF is a fiberboard that is often used as a flooring material though it has been falling out of favor because it really can't get wet. MDF stands for Medium Density Fiberboard and, personally, I've always just thought of it as sawdust glued together. It does NOT do well in wet environments.
If I was doing a bathroom floor especially I would use 3/4" plywood instead. It will hold up a lot better in wet environments and the cost is minimal in comparison between them.
Depending on where you live a sheet of 4x8, 3/4" plywood could run you up to $40.
Sounds like you won't need more than two sheets for your space.
Here are the comparisons between MDF and HDF
https://www.builddirect.com/learning-center/flooring/wood-they-different/
The cost of these 2 would be determined by a visit to the store, you selecting a product you like and the sales person advising you on what the total cost would be for the product, based on square feet. They could also talk to you about water resistance and if it is good to use in a bathroom.
My hubby used to work at Roseburg Forest Products and they make a product called medex which combination of moisture resistance, superior MDF board properties, and a formaldehyde free adhesive system.
But it still needs to be primed and painted well.
And it IS water proof.
Manufacturing Locations & Capabilities
Suzanne: Please do not use MDF in a bathroom. It will be a mess in no time. MDF hates water. You could get the luxury vinyl that looks like wood, or peel and stick tiles or ceramic tiles. You will be much happier in the long run.
I'd look for tile or vinyl
MDF is not waterproof and you will find it hard to clean as well- it is not recommended for flooring- it is used mainly for vanities and window sills not for floors- we don't have pricing for materials you would have to look online at places like Home Depot, etc whatever stores are in your area to find out prices per sheet or square foot- MDF swells and again is not waterproof so not a good idea for floors. You would do better to add peel and stick tiles or vinyl it would be cheaper and work much better
I would not use MDF on a bathroom floor. Go to your local home improvement store and look at flooring for bathrooms.
Do not use MDF or HDF. It's recycled paper and resins pressed under heat and pressure. It's not waterproof, swells, and shreds when wet. Use plywood
Hi Sussane,
HDF (Heavy Density Fibreboard). MDF (Medium Density Fibreboard) Not sure this would be a good flooring on it's own as it swells when it gets wet and will have to be replaced. Best wishes
Could they have meant LVP? That would be much much better. MDF will swell and be ruined very quickly.
Hello. Please reconsider using mdf. It is a composite wood product that would be aggravated by any introduction of water.
Hi Sussane, try this post:
https://www.familyhandyman.com/article/using-mdf-as-cheap-finished-flooring/
MDF will swell and you will hate it in your bathroom. You don't want to put a lot of work into something that will ruin very quickly. Check out a waterproof floating floor. Sold at Home Depot or Lowes ....easy to put in and used in areas where hurricanes are common. I am considering this for a bathroom as well. They are interlocking and you don't have to use grout. To make MDF look good, it will be a lot of work.
Hi Sussane, I wouldn't put MDF or HDF in the bathroom since they both absorb a lot of water and will swell up and get all moldy. HDF is just a higher density version of MDF (Medium Density Fibreboard)
MDF would not be a good floor to use in a bathroom. It will absorb water, swell, and peel.
Agree that MDF is NOT suitable for high moisture areas. I have used 1/4" plywood as a surface, smoothed the seams, and then covered the floor with 12" square self-stick vinyl tiles. You can get them for about $1 each. However, I prefer a tile floor in the bathroom.
Hello Sussane, hope this helps you out,
https://www.youtube.com/watch?v=CIfu-8pjf5w
I also want to do some repairs to my bathroom this year, and I'm thinking that I don't have reliable tradesmen that I could ask: design, plumbers, etc. Can someone give me some recommendations?
Hey there! MDF (Medium-Density Fiberboard) isn't ideal for bathroom flooring due to its sensitivity to moisture. Bathrooms are usually humid, and MDF can swell and deteriorate when exposed to water. HDF (High-Density Fiberboard) is slightly better as it’s denser and more resistant to moisture, but it still might not hold up well in a bathroom environment. For 30-40 sq ft, the cost will vary based on the quality and installation fees, but it’s generally not recommended. I’d suggest looking into waterproof vinyl or ceramic tiles instead for better durability and longevity.
Last year, I did some repairs in my house, thinking it would be easy and fun. It turned out to be quite challenging without professional help. I've always dreamed of having a beautiful bathroom but wasn’t sure how to make it happen. A friend recommended AC Bathrooms, which handles everything from concept to design. They can really bring your bathroom dreams to life. To find out more, check out AC Bathrooms .
MDF, or any composite fiber boards, along with plywood are not good choices for a bathroom due to humidity and water. They'll fall apart near instantly regardless of how they're painted or sealed or start to mold. You're best off using something like a luxury vinyl plank or tile or tiles. I realize there's a cost difference but putting MDF or similar in would eventually be way more expensive given you'd have to replace it.
You would have to get o ooo ricing from your local supplier as pricing fluctuates greatly geographically