MCM Drastic to Fantastic-A Dresser Tale

1 Material
$40
7 Days
Medium

So anytime I find a dresser for $20 I feel beholden to shove it in the back of the truck. This MCM guy had great bones but horrible yellow beat up paint. So you look beyond the ugly and try to see what can happen.

This guy stayed in my garage for 8 months before I decided to tackle him. The first step was to clean this beast to see how deep the scars and scratches were. Using soapy water on the outside and Windex on the inside it was clean but still butt ugly.

The next step was to get out the orbital sander and take the bumps and scars out. When dealing with a piece that is 95% veneer you have to be careful you don’t sand too deep. What I found was veneer missing on parts of the drawers. That issue caused me to rethink just using a poly coating over the wood.

My first thought was to use a dark coastal blue just on the drawers. The more I thought about it the less I liked the idea. So I got out a pine board and tried out several colors to see how they would look. They all looked good, so I used them all. I painted three coats of paint on the drawers and put polyurethane on the sides and top. The brass pulls were very unique. To clean them I boiled them in 2 parts water, one part white vinegar and a tablespoon of salt and cleaned them with steel wool. What I thought were brass knobs were not. They were a dark aluminum which is typical for the 1950’s. They looked even better than the painted brass.

The pine wood strips on the drawers, dresser and feet I decided to just poly to give contrast.

So I now think this MCM dresser is my favorite. It challenged me on many levels but I am glad I rescued it from Drastic to Fantastic.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  3 questions
  • Denise Denise on Apr 21, 2020

    I don't know if my other message went so please forgive the duplicate if there is one. I'm currently working on a similar project and I would like to know how you finished the top. Things like what grade sandpaper, if you had to do any extra work to make it look so good and finally the finish you used?

  • Stephen B. Stephen B. on Apr 21, 2020

    I have a dresser that has bumps in the composite under the wood veneer, this is on the top of the dresser. Unfortunately I sanded through the veneer into the composite wood. I have a spot about the size of an egg revealing the composite. I covered this with wood-filler. Is there a way to fix this so I can stain the the top without showing a patch of wood-filler?

  • Crazyliblady Crazyliblady on Apr 21, 2022

    You used the acronym MCM in your description of the dresser? What does that mean?


Comments
Join the conversation
4 of 63 comments
Next