Farmhouse Bedroom Set - The Dresser
This is a project that I just finished! It was a pretty advanced build, but I feel proud of the outcome! It's a bit of a detailed process, but here is the basic process:
Build the frame
Build the drawer cases
Assemble legs and feet
Set up the drawer divider
Add the top and trim
Assemble the drawers and then install them.
Add hardware and stain
I started of with building the frame. I used two pieces of 3/4 inch plywood to give me the rectangular shape.
Assembling the drawer cases
Next we added the legs on the side and the dividers in the middle. After that we put the drawer slides in.
Tip. Make sure you your drawer slides sit far enough back that when you pull out the drawers you can’t see into the back of the dresser.
Lastly we made drawer boxes and installed them.
All of the drawers set in place!
We then added in the hardware and finishing touches.
We finished it off with a Dark walnut stain and semi gloss sealant.
Here is the finished project, it came out beautiful! Feeling really proud!