Monogrammed Summer Pots

3 Materials
I decorated these pots with colorful fabrics and mod podge! I even monogrammed one with vinyl from my Silhouette machine. It is so easy to spruce up your pots for the summer!

I've been wanting to try mod podging fabric on terra cotta pots for awhile! With floral being such a popular fabric right now, I decided upon two different floral fabrics at Hobby Lobby along with a spring green chevron fabric. I've also been really into HTV (heat transfer vinyl) lately and I was curious if I would be able to apply my monogram onto the fabric and then mod podge it to the pot without any wrinkles. Well, you know what? It worked and it was SO easy! These pots would make great gifts for a special friend in your life, Mother's Day, teacher appreciation, etc.







You can visit the link to my website below to see how to add a monogram to your pot.

How to Make Fabric Pots with Mod Podge:

You'll need three 4" terra cotta pots with lids, fabric, mod podge (I recommend the outdoor kind) and spray paint. You'll also need heat transfer vinyl if you plan to monogram them (not pictured).

I took the lids outside to spray paint them white. You can get creative with this and spray paint them an accent color or whatever you want to do. I purchased some little 'footies' at Lowes, which I put under the lids to hold them off the scrap paper while I spray painted them.

Measure your pot to see how how much fabric you need. I added an inch of fabric for the top and bottom, since you'll be wrapping the fabric over the top and bottoms of the pot.

Cut your fabric to the size you need for each pot. Don't forget to iron your fabric, so you don't have any creases or wrinkles.

Mod podging the fabric onto the pot is easier than you'd think! I did a little section at a time and would add some mod podge to the pot with a sponge brush and then roll the fabric on top and smooth out any wrinkles. When you're done, add some mod podge on top of the fabric that overlaps at the end so that it is sealed and won't come open.

You will have some overlap of fabric on the top and bottom of your pots. You'll want to take some fabric scissors and cut the fabric every 1" or so, otherwise it won't lay flat when you mod podge it to the top/bottom of the pot.

This is what your pot will look like when its done.

I hope you enjoyed this summer project! These are going to be so pretty out on our patio this summer!

Suggested materials:

  • Fabric   (Hobby Lobby)
  • Mod podge   (Hobby Lobby)
  • Terra cotta pot   (Hobby Lobby)

Carrie @ Curly Crafty Mom
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

3 of 9 questions
  • Gwendolyn A. Taylor Gwendolyn A. Taylor on May 08, 2018

    how do you protect it From the weather?

  • Christine Edmonds Christine Edmonds on Jun 01, 2018

    Would it hurt the plants if you used a sealant on the material to make it more weather and water proof?

  • Kitty caffe Kitty caffe on Apr 21, 2019

    Is there a reason you are using terra-cotta rather than plastic, other than the cute shape ? What happens when the moisture seeps through the terra-cotta? Nothing happens because the mod podge is waterproof ?

Comments

Join the conversation

2 of 30 comments
  • I would think wooden planters would be ok, not sure about plastic, tho since it isn't a porous material...

  • Lindy Lindy on Mar 05, 2020

    These are REALLLY pretty. I think I will do this, but use as an accent on my counter for utensils and in my craft room! I would be uber upset if dirt got on my pretty pots, but that is just me. Great job!

Next