Pallet Snownman

by John Wade

2 Materials

3 Hours

Easy

This pallet snowman is the easiest project that I ever made. I started off by just pulling 3 pallet boards off of a pallet

Here are the 3 boards I pulled from a pallet

I only use gorilla glue for all of my wood projects

Then I set my 3 boards on there sides to gorilla glue them together on a lifter

Once I have the board pushed together I clamped them and let them set over night

While the boards were setting I cut out the eyes, mouth and nose out of scrap wood I had laying around

Then I laid the face out on the boards to get my location and then I painted the face with black for the eyes and mouth to make it charcoal looking and the nose red

Then Ii added a 20 in board on a slant for the hat and i painted the body a white wash and the hat a gray paint from Hometalk

Then I glued the face to the boards

After it dried I added the scarf and here you have the easiest project to make with pallet wood. This only has 1 cut with a saw and it was the board on a slant for the hat

Enjoyed the project?

You can do it! Saved to your projects

Pallet wood

Paint/scarf

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.

Hometalk may collect a small share of sales from the links on this page.More info