How to Install a Sheet Vinyl Floor

90 Minutes
In our small bathroom we installed this easy vinyl sheet floor, that looks exactly like tile, but is far less expensive, quicker to install, and easy to clean.
First, prep your room. We did this in a small bathroom, so we removed the vanity and toilet, which was part of our makeover plan. Remove the baseboards too if you have them. Then sweep and wash the floor.
Next, make a diagram of your room so you’ll know how to cut the vinyl. Just a simple one will work. Measure out each edge of the wall very exactly and write it down on the diagram. It helps if you have two people doing this.
After you have all the measurements, you’ll prepare the floor to be cut. Sheet vinyl flooring comes in large rolls. Select a space where you can roll out the entire piece.
After that, transfer the measurements to the floor, cut it out and install it. See more details on my blog post.

Jessica @ Decor Adventures
Want more details about this and other DIY projects? Check out my blog post!

Frequently asked questions

Have a question about this project?

3 of 8 questions


Join the conversation

2 of 135 comments
  • Jenny Jenny on Jan 22, 2021

    Next time you need to replace the vinyl you will have the perfect template. Just lay this vinyl on top of the new and drawer round it.

  • Dmholt4391 Dmholt4391 on Jun 22, 2021

    Thank you, thank you, thank you!!!