Clean and Lube Your Tower Fan to Keep It Running
I have one tower fan that is over 9 years old! and the one I used for this post is over 6 years old. Truth be told it stops working when the dust and hair gunk up the fan blade motor. It is not hard to take apart these fans and clean and lube them.
UPDATE: I ADDED A YOUTUBE VIDEO ON TAKING OFF THE BACK FOR ANYONE HAVING TROUBLE REMOVING THE BACK AND PUTTING IT BACK ON
Want to see more? Stop on over and read more
Enjoyed the project?
Comments
Join the conversation
-
Linda Hardin on Feb 02, 2019
I read the comment about not throwing things away. How true that is. I live in a mobile home park near the dumpsters. I routinely check them for discarded fans and vacuums. You would be shocked at the things I find. So far after 4 years I have not found the first vacuum that was;t in working order after cleaning. Some looked brand new. Even a Dyson. Fans too. They all just needed cleaning and lubricating. We are a country with an embarrassment of riches. The vacuums were clogged with carpet freshener. It must be a vacuum cleaner salesman best friend. One tower fan I found had the odd screw that was mentioned. It was a very expensive fan too. It needed a fuse. It has worked 2 years for me. I know some will look down on me for dumpster hauls, but it is terrible the things that are thrown away with so many in need. I give most of the stuff I get out away to needy people after cleaning. Clothes still have tags on most. It makes me so sad to think of all the good things that are wasted each and every day.
-
ViKi Payne on Jun 15, 2019
You have NOTHING to be ashamed of!!!! You are doing a wonderful thing, not only for others, but for the environment as well! I commend you for all that you do!!! God is very pleased as well!!! "Waste NOT, WANT not"!!! Keep up the great work!!!! ♥️
-
-
-
Frequently asked questions
Have a question about this project?
My Lasko tower fan has 6 screws, 5 of which are phillips head screws. 2 are sunk deep into holes. The one I can't get out is one sunk into a deep hole. When I shine a flashlight into the hole, it sort of looks like a flat head screw, but without the slots. I think they used a special screw so the cover will not be removed. It is not a hexhead screw, either, but something I've never seen before. I am so close to getting the cover off, except for the one. I am tempted to break the cover to get it off. I need to clean & lube this fan, it is making a strange new noise when I have it on.
Any suggestions?