DIY Wooden Sleigh
by
Amber Foster
(IC: blogger)
7 Materials
$30
1 Hour
Medium
I bought a vintage wooden sleigh at a garage sale last year. EVERYONE wanted me to start looking for them one and it was of course impossible to find one for them all. Therefore, I decided I would just start building them! Now you can build one too!
Start by cutting the first piece of wood directly in half, about 48" each, and cutting the ends at a 45 degree angle for the 2 runners.
Next, cut the support braces. Two straight pieces 13" long each.
Also, cut one more straight piece of wood 18" wrong for the top cross bar.
Prepare the top part of the sled by cutting 3 pieces of wood. One 33" piece and Two 30" pieces. Cute 45 degree angles on both ends of the 30" pieces in opposite directions.
Cut dog ears on all corners of the 33" piece.
Paint both of the running boards red, or whatever color you choose.
Stain all of the other pieces the same color, or paint them if you like.
Now, it's time to start assembling the sled. Place the two runners down flat on the table and lay the 13" support beams across the top. Secure them with wood glue and nails.
The attach the crossbar to the top by the same method.
Lastly secure the seat of the sleigh again with wood glue and nails. Put the longer piece in the middle and the two shorter pieces on the side. Visit www.amberfostercreativity.com for more super cute DIY'S!
Enjoyed the project?
Suggested materials:
- 3, 1"x4"x8' pieces of wood (Hardware store)
- Red Paint (Hardware or Craft Store)
- Wood Stain (Hardware Store)
- Tape Measure (Hardware Store)
- Wood Glue (Hardware Store)
- Nail gun or Hammer and Nails (Hardware Store)
- Miter Saw (Hardware Store)
Want more details about this and other DIY projects? Check out my blog post!
Published October 31st, 2017 11:52 PM
Comments
Join the conversation
3 of 4 comments
-
Bryan's Workshop on Nov 02, 2017
Awesome! I'm definitely making a sled this year now. Thanks for sharing!
-
-
Sarah on Nov 05, 2017
Love this project! I made 3 at one time then decorated them each differently! Thank you for sharing this project!!
-
Amber Foster on Nov 06, 2017Oh! Sarah! You don't know how much it warms my heart that you shared this with me! Amazing job and thank you so much for sharing😊
-
-
Frequently asked questions
Have a question about this project?
Hi Amber for the sled you put the length of the boards but what are the widths thank love this sled .
What is the width of the runner please