Raw Wood Nightstands
Update your old worn out furniture with a fresh new whitewashed raw wood look.
We found these old nightstands for cheap on marketplace.
When I went to prep them for paint with a light scuff sand, I noticed the old finish was coming off wayyy too easily.
Since the old finish was coming off easily, I decided to bust out the power sander and sand it down to raw wood.
This was the most time consuming step, and the most challenging, to make sure I didn't sand through the thin wood veneer.
At this point I wanted a to keep the raw wood finish, but I wanted to protect the wood, without deepening the wood or bringing out any orangey wood tones.
So, after the nightstands were sanded down to raw wood, I sealed them with water based poly to make the next step easier to work with.
Then I gave them a quick whitewash (simply white paint thinned out with water) to make the wood look lighter.
After the whitewash was dry, I sealed them again with 3 coats of water-based poly for durability and to protect the new finish.
The old knobs were updated with new clear knobs as a final touch!
Enjoyed the project?
Suggested materials:
- Old Nightstands
- Power Sander / Sandpaper
- White Paint (thinned out with water)
- Cheap Paint Brush
- Water-based Polyurethane
- New Knobs
Frequently asked questions
Have a question about this project?