DIY Dough Bowl
I was envisioning a giant dough bowl for my dining room table but boy are they expensive to buy! So I set out to MAKE one and it turned out so good! Dont worry- no carving or grinding required!
This would probably work with multiple size boards but I happened to find this behind my house and thought if I could double it up I could create a thick “slab”.
Usually dough bowls are made by grinding or carving out of a single slab but this will be much less labor intensive.
Decide how long you want your dough bowl and cut into 2 even pieces. I used the full length of this board which left me with two 35 inch long pieces. Its going to be big!
You can see how the layered boards will give me a faux slab to work with. This method does require 2 boards over a true slab.
Using only ONE board draw the shape you want to be inset in the bowl.
Using a jigsaw, cut out your shape by drilling a hole for your starting point. Again- only for 1 of your 2 boards!
You will now use wood glue to glue your 2 boards together. One on top of each other. You can get an idea of what your bowl looks like now!
Clamp and let it dry for around 24 hours
Once dry, you’ll want to give your slab a more “bowl-like” shape by cutting the bottom corners at an angle. I did this by running the whole thing through my table saw at 45 degrees. It took me a few tries to get the blade as high as I wanted.
Now its looking much more like a bowl!
Using wood filler or sawdust plus glue, fill all the seams where your 2 boards meet. This will give it the look of one solid piece of wood.
Finally, sand sand sand! It took me about 40 minutes using a 40 grit sanding disc. You’ll want to get all those sharp edges as round as possible. Really shape that bowl! Depending on the look you want, you could sand even more or less.
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Gay55233034 on Oct 01, 2022
Wow, you did a great job on your bowl!! It could be used for so many things
-
-
Meredith Michener on Oct 02, 2022
GREAT job!! That took a lot of patience!!
-
Frequently asked questions
Have a question about this project?
A mask, but no protective eyewear?? Great job on the dough bowl though.
Why do they call them dough bowls?.........I love what you did and I love the bowl.........VERY clever! Your table looks so nice!!
Could you put wax in this to make it into a candle? Or what would be your input on that? I want to make a dough bowl, but 4x6 lumbar is hard to find!