How to Make an Eyeball Coaster
Just in time for Halloween! You can trust this resin coaster will keep an eye on your drink! How to make decorations for Halloween does not need to be hard! I made this super easy resin coaster with eyeballs and if you drill a hole into it, it can become an ornament! If little eyeballs aren’t your thing, I have a big eyeball coaster that just might catch your eye!
Mix your resin according to the package directions. One ounce should be fine for the base.
Use a lighter to pop the bubbles.
Take your googly eye eyeballs and place them into the resin. You want to go one by one so they are all facing up.
Press down the eyes with your stir stick. Pop bubbles if needed and let it cure a minimum of six hours. Because the eyeballs have air pockets, they like to float. If you let it cure for at least six hours, they should not float when you put on the next layer.
Mix more resin. An ounce should be enough, but it depends on how thick your eyeballs are. Pop bubbles and let it cure a minimum of 12 hours.
Once cured, remove it from the mold.
Here is your fun eyeball coaster!
Happy Halloween! You can find more information and 100's or free crafts on by blog.
Frequently asked questions
Have a question about this project?