Pumpkin Crafts // How to Make Copper Leaf Pumpkins

$100
2 Hours
Medium

I decided to make copper leaf pumpkins. Can I just say this is one of my absolute favorite pumpkin crafts DIY’s ever?

I have always been in awe of crafters that have successfully completed DIY’s that involved gold, copper, or silver leaf. I have seen projects where these super-thin sheets of metal have been added to mirrors, frames, and even furniture. But somehow I imagined myself doing this and ending up with sheets of gold leaf stuck everywhere but on my project. Lately, I have been on an orange and copper craze and I have wanted to try my luck at pumpkin crafts. So I decided to make copper leaf pumpkins.


My Favorite Pumpkin Crafts


Can I just say this is one of my absolute favorite pumpkin craft DIY’s ever?

I assumed the copper leaf would be expensive. But I found imitation rose gold sheets for crafting on Amazon and purchased 100 sheets for under eight dollars! I was able to finish all three of these pumpkins using less than 100 sheets. The color is perfect as rose gold and copper appear to be the same color!


How to Make Copper Leaf Pumpkins


What You Need for Pumpkin Crafts // Copper Leaf Pumpkins


One package of Imitation Leaf Gold Rose for Gilding for Crafting (you can also use silver or gold)


Faux pumpkins in assorted sizes


Mona Lisa two ounce Metal Leaf Adhesive


Mona Lisa water-based sealer


Rubber gloves


Assorted paint brushes


I thought about using real pumpkins but decided I didn’t want to go to the trouble of making these copper leaf pumpkins if they weren’t going to last.

The metal leaf comes in a stack and you can see here how thin it really is! You want to wear gloves so you don’t leave fingerprints or stick to the metal. It is much easier to handle with gloves.


When you handle the leaf, be sure to use the paper inserts so it doesn’t tear. (And if it does tear don’t worry. You will use plenty of small pieces and you have plenty!)

Step One – Apply Adhesive


Use a paintbrush to thinly cover the pumpkins with the adhesive. Be sure to place your pumpkins on a plastic-type surface that won’t stick to the pumpkin. Try to cover all surfaces of the pumpkin with adhesive.

Let the adhesive dry for thirty minutes.

Step Two – Apply the Copper Leaf


Gently lay a piece of the copper metal leaf on the pumpkin. Continue to cover with as many sheets as necessary. Don’t worry about spots that are missed as you will come back and add more copper later.

Gently press down on the copper sheets to adhere the metal to the adhesive. I used my fingers (with gloves) and a dry brush to do this.

Continue to lay sheets down on any spots that need covering. Don’t hesitate to pull on the sheet and use the leftover metal for another area.

Step Three – Covering the Entire Pumpkin


Once you have covered as much area as possible use your dry brush to gently remove any excess copper. As you discover small areas that aren’t covered, continue to add more copper. This is the step that surprised me the most. I could add the tiniest scrap of the copper to the pumpkin and it would cover it. And it didn’t leave visible seams or edges.


This is when I realized I love this process!

At this point, you will discover some areas that need more glue. Gently reapply glue to the non-adhesive areas and wait thirty minutes.

This was the perfect opportunity for me to start on my next pumpkin. Can I just say at this point I was hooked on pumpkin crafts!

My second pumpkin was a lot easier. I had figured out that I didn’t have to be exact and covering a smaller area was a lot simpler to do.

Step Four – Applying the Sealer


Can you believe how these turned out? This is the step where you want to lightly brush on a water-based sealer. My shipment was delayed so I will be doing that later today.

This morning I walked into the kitchen just to make sure my new copper pumpkins looked as good in the light as they did last night. And then my sweet husband said, “Last night I wasn’t sure what you were doing, but today these look great”.


I am still blown away by how easy and inexpensive these pumpkins were to make. I love them and am already thinking of ways to do this again for the Christmas holiday.

If you are enjoying my blog, you can sign up to receive my blog updates here. .

Links to the Items Shown in This Post


Here are some of the craft supplies you can use to make these pumpkin crafts.


Here are some fabric pumpkins you can buy. No crafting needed!


Check out this fall foliage for under $15. Click on the photo to see more.


Here is some fall foliage under $21. Click on the photo to see more.


And look at this fall decor for under $26. Click on the photo to see more.


Fall wreaths are so gorgeous. Below are some of my favorites! Click the photos to check them out, they are all under $45 each, most are under $30!


You might also like the containers for your fall foliage. Click on the photo to see more.


Pin the image below to your Pinterest Craft or Fall boards.

ABOUT LESLIE

Welcome to My 100 Year Old Home. I started my blog so I could share my passion for entertaining, décor, cooking, and crafts. You will find all this and more right here. Read more…

My 100 Year Old Home
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • 17335038 17335038 on Sep 26, 2021

    How many pumpkins were you able to complete for the $100 listed cost of the project? The three shown in the posting?

Comments
Join the conversation
3 of 11 comments
Next