Contemporary Kitchen Craft Containers

5 Materials
Our contemporary kitchen craft containers and made completely from soda bottles! They're simple, cost only pennies to make and are fun to create! You can SEE ALL PICS HERE
Gather your supplies which include 2 tall slim 17 oz flat or straight sided bottles.
Wrap masking tape around the very top after the curve and then cut along the bottom line for a nice straight cut. Do this on each bottle.
Wrap masking tape around the center of one of the bottles, covering the top half with a paper towel. Spray paint. Allow to dry completely. Metal paint will show fingerprints horribly if its not totally dry.
Cut a slit into the open end of the clear container, roughly 2 inches long.
Apply a small amount of glue to either side of the back of the label.  Place the label on the front of the painted bottle, centered vertically over the paint’s edge.
Cut a slit into the open end of the clear container, roughly 2 inches long. This allows the bottle to slide more easily onto the base.
BAKERS TWINE HOLDER Gather supplies. We used a 12 oz Pepsi bottle.
Using masking tape, tape off the center of the bottle just below and above the ridges.  Cover the center space with tape or a paper towel.
Spray paint the top and bottom of the bottle in the color of your choice.  Let dry thoroughly to prevent fingerprint marks.
Using a drill, create a hole in the center of the bottle lid.  The hole should be the same size as your twine.
Cut a ribbon at 22 inches in length. Fold the ribbon in half to find the center. Apply a dot of hot glue to the center of the ribbon. Apply the ribbon to the center of the clear portion of the bottle.  The hot glue dot will be the front of your dispenser.
Cut a flap on the exact. back where you glued the ribbon just large enough for your twine ball to fit.
Insert your ball of twine and feed the string through the cap hole.

Nancy at Craft Your Happiness
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

3 of 8 questions
  • Debbie Green Debbie Green on Apr 21, 2018

    I like this project. I have many walls that I still have not found any ideas for. This will be great! Thanks for sharing! I actually have a question about the Metallic spray paint you used for this. I bought the exact same paint. My problem is after it dries, it dries matte and not shiny like yours. What am I doing wrong?

  • Kk Kk on May 29, 2020

    Cute! Cute! Instructions on the one that holds bags ?

  • Maureen Lasonde Maureen Lasonde on Feb 18, 2021

    Hi

    Instructions please on the bag holder....Thank you

Comments

Join the conversation

2 of 36 comments
  • Julianne Spreng Julianne Spreng on Apr 19, 2019

    Totally cool way to reuse instead of recycle. Putting the bottle pieces together this way is what I do to finish off a tube or bottle of lotion, conditioner, etc. Cut it in half, put the empty section back on the bottom, and scoop or dip out until it's all gone. No waste. I so going to use this idea!!

  • Veronica Jones Veronica Jones on Apr 20, 2019

    Some great ideas there, thanks for sharing. I will be trying those out

Next