Easy Concrete Planters

The next step is to mix up the concrete and water in a large bucket. I used one of those 5-gallon buckets that are available at any hardware store. Mixing can get messy, so I highly recommend using a drop-cloth as your work space. Rubber gloves are a must to protect your hands. You can mix it manually, but I used a mixing paddle that works with a cordless drill (because power tools are more fun right?) so it was a bit messier and I had a couple of accidental splashes. Make more concrete than you think you'll need, as it's important to cover every single inch of the towel with a nice thick layer of concrete. I used more a bit more water than you would usually use because the thinner consistency would be easier to coat the towels.

Once you are happy with the consistency of the concrete, push the towel down into the bucket and then take it out and reposition it and push it down again. You will need to do this step several times to make sure the entire towel is coated. If you can still tell what color your towel is, then you need more concrete on it.

After you have the entire towel covered with concrete, simply drape it over a planter or bucket to dry. I used a few upside down planters stacked on top of each other so that the final shape would be tall and narrow. The wet towels were much heavier than I thought, and the first planter I used wound up collapsing under the weight of it, so make sure you are using something sturdy.

They took a couple of days to fully harden, but it was well worth the wait. They came out exactly as I pictured and they were so easy to make! I chose not to paint them for now, but I'm sure I will at some point. Stay tuned to see the update.

Added bonus: it looks great on my plant shelf near my Faux Terracotta Planter (click the link for the tutorial on that one).

0 views0 commentsPost not marked as liked