How (and Why) to Make Your Own Wood Filler

2 Materials
$1
5 Minutes
Easy

You can buy wood filler at the store already made, so why bother making it yourself? The reason is simple:


Store-bought wood fillers do not absorb stain well enough to make your joints and filled areas look seamless. Plus, making your own is cheap and easy!


Watch the full tutorial on YouTube, or scroll down for the three simple steps!


Collect Your Saw Dust!


Gather up some of your sawdust, and if you're anything like me, you have PLENTY of it! I've found that the finer the dust, the better.


Put it into a small disposable container, or a resealable container if you have a long project ahead of you.

Add Wood Glue


Mix in approximately an equal portion of your favorite brand of wood glue. I like Gorilla brand, but any brand will be fine. You might need to play with the proportions a little bit, adding more glue or sawdust, until it gets to a nice consistency (which should be a bit like cookie dough).

Use As Needed!


Use your home made filler to patch up the gaps in your project, and allow to dry for several hours or overnight. Then sand thoroughly, and stain and seal as usual!

Resources for this project:

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Frequently asked questions

Have a question about this project?

  1 question

Comments

Join the conversation

5 of 7 comments
  • William William on Aug 11, 2020

    I have use this technique thru the years for many applications. Some hardwood sawdust mixed with wood glue won't accept stain. But does work on softwoods.

    • ChickFix ChickFix on Aug 12, 2020

      Thank you for the tip! I haven't done as much work with hardwoods yet, so I will be interested to test it out. What would you recommend on hardwoods?

  • Debbie Debbie on Sep 24, 2020

    Does it last long in a sealed container, or do you simply mix as required? Thank you!

Next