How to Build Your Very Own Pallet Wood End Table and Add a Graphic
by
Art is beauty
(IC: blogger)
Have you ever wanted to know how to build your very own end table using FREE pallet wood. Well now's your chance. Head on over to see how its done! and with a Freezer paper transfer from the +The Graphics Fairy LLC too! #ReclaimedWood
zerpaper
zerpaper
Good Morning my Beauties!
This right here is free pallet wood and other scraps from
Like I have said before...free stuff and power tools make my day...
So with a couple of cuts I started making my table.
First I made my apron and attached the sides together.
Then I added my legs. Making sure everything was square and level.
I cut all my boards for the top the same size and started screwing in my boards.
Now for the fun part.. freezer paper transfers.
I printed my graphic out on my freezer paper in reverse. I have glued my freezer paper to card stock to make it easier to feed through the printer. Shiny side up so that you can transfer the ink. Now the fun part...again..:) Here is where I lay down my graphic and start burnishing it
I painted the legs with some paint I had. It was a mix of some blue and cream color, to make a nice dusty blue.
I just love how it turned out; and the best part...FREE!!!
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published July 30th, 2014 9:01 AM
Comments
Join the conversation
3 of 4 comments
-
-
LeAnne on Aug 11, 2014Beautiful! I haven't yet had the courage to transfer a graphic. You make it look like I can though! :)
-
Frequently asked questions
Have a question about this project?