Did You Ever Think to Create Furnitures With Your Old Fences?

2 Materials
$30
5 Hours
Medium

Hello Guys,Welcome back to MyATCtv DIY recycled projects!I am back again with some interesting recycling furniture ideas. This time I will use old fences to make DIY patio chairs and bench.


For this wonderful creation, I will be using the old fence panel which wasn’t needed anymore. So, instead of throwing away the fence I will recycle it to make beautiful and yes comfortable patio chairs.

 For more interesting recycling projects or creations join meon my YouTube channel MyATCtv DIY. 

I was very happy to be nominated and receive my green pin from Loes Ypma the representative of the Floriade and the Growing green cities program.


A big thank you to the entire team organizing this event!

And I will also take this opportunity to introduce to you the Floriade Expo 2022. This expo will be taking place from April to October 2022 and sharing with us what a green city of the future should look like.Below, I am sharing some pictures and drafts of DIY patio chairs that will help you in making an attractive seating for your patio or garden.If you would like to see more images of this DIY project, Check out my YouTube video Tutorial for better understanding!!!

Let’s start

First let us see what we need to make the patio chairs. Here is the list of important tools that help us with the making of patio chairs.



  • Fence panel
  • Screwdriver
  • Large screws
  • Miter saw
  • Measuring tape
  • Carpenter scale
  • Pencil
  • Cushion
  • Rolling sander
  • Power sander
  • Table planner
  • Sealant
  • Green and white paint

and more below...We put together a list of some of the tools used in the shop on our Amazon Store (affiliate link), if you'd like to support what we do, shop through this link: MyATCtv Amazon Store

Step1: Get an Old Fence Panel For ChairsIf you are planning to throw your old fence panel, then don’t do so. Instead use the old fences to build beautiful patio chairs. So, get an old fence panel of required size to make these amazing chairs. Here the are measuring 1.80m*1.80m.

Step 3: Make the Separated wooden board Smooth and CleanDue to weather conditions and long time use, the fences are untidy and messy (with a lot of climbing plants named here: “Klimop”. So, to make the slats clean and look like new again I will use thickness planer. Pass every slat through this planer to make the surface even, smooth and clean.

Step 4: Cut the Long poles In several parts for the Legs(frame) Of the designI will measure the long wooden piece available with my measuring tape. This one is almost around 300 cm but most of the others are shorter than that. Now, I will make a mark at 165 cm and will cut the long one at the marked point with my miter saw.

Step 5: Cut the wooden board for the chairs seats and bench Now I will prepare the different slats for the seat of the patio chairs and benches. For single-seat chair I will use small pallets and for Double-Seat chair I will use large pallet pieces. Now I will use three large pallets for seating of two-seat chair.Use two cushions of your own choice to mark points on the three boards to cut them according to the size of seat. Mark lines parallel to cushions on both sides of those boards.

Step 6: Make the Edges of wooden board Round and SmoothNow when all the boards of the chairs are ready I will make their edges round and smooth with my router table. Whether it is large pallets, small on or legs part I will make the edges of all smooth and round.

Step 7: Make the Legs Of the Modern Design ChairsI will use the long wooden pieces to make the legs and frames of the chair /bench. For this, I will cut the large piece at an angle with miter saw from the end (please check 3D plan for more accurate dimensions) . Now, at some distance from this cut I will make a straight cut. I will repeat the steps for all the required legs and in order to create the frame.

Step 8: Join the Parts of Legs Now I am going to join the parts of the legs together with screws but as this wood is very strong I will advise to pre drill the holes before inserting the screws. After this, I will check the arrangement for different parts of the patio chairs to make them fit properly within the leg space.

Step 9: Make the Seat and Backrest of ChairNow, after the legs, I will place the boards one by one with screws to make the seating area and backrest of the chair (please note that those screws are also the same ones that were already on the fences). Remember!!! We recycle as much as possible...

Step 10: Use a protective oilNow when the structure of the chair is ready, I will apply a coat of protective oil over it. This will give a fine finish to the patio chairs and will also protect them from getting rotten.

Step 11: Now Chairs are ReadyHere the beautiful patio chairs and bench for your garden are ready! You can place the cushion on the seats for more comfort.

Step 12: Paint the Chairs for More Beautiful LookIn the end I will paint the chairs with green and white colour to make them look more beautiful and attractive piece of furniture.

And remember that recycling at home is a family affair!!! And feel free to come and join us at the Floriade Expo 2022!

Resources for this project:

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page. More info

Top Hometalk Projects

31 Creative Ways To Fill Empty Wall Space
20 Easy Projects To Help You Get Ready For Easter
30 Address Signs That'll Make Your Neighbors Stop in Admiration
30 Ways To Use Old Jeans For Brilliant Craft Ideas
30 Fun Ways To Keep Your Home Organized
30 Great Mason Jar Ideas You Have To Try
30 Fun Ways To Keep Your Home Organized
These Stunning Seating Ideas Will Blow You Away
15 DIY Projects That Will Make You Say "WOW!"
3 Cute Step-by-Step Ideas For Unique Planters
17 Faux Brick Ideas For Your Home
31 Brilliant Ways To Repurpose Everyday Items Into Perfect Organizers
17 DIY Projects You Can Start And Finish Tonight
15 Cute Ways To Decorate Tin Cans Into Planters
15 Fun Things You Can Make Using Your Cricut
Mr ATC

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

1 question

Join the conversation

3 of 27 comments
Your comment...