DIY Jingle Bell Ornaments
Make these adorable DIY Jingle Bell ornaments to hang on your Christmas tree!
And make sure you subscribe to At Lane and High so you don't miss any of the fun DIY's!
Here is what you will need:
- floral wire
- jingle bells
- bows
- ribbon
- wire cutters
Step 1:
First, you need to cut your wire to the desired length. This is totally up to you, the longer the wire the bigger the ornament will be.
Step 2:
Start fishing the jingle bells onto the wire until the wire is full.
Once the wire is full wrap the wire around itself and secure it so it doesn't unravel.
Step 3:
Cut a 4-inch piece of ribbon and wrap around the jingle bell ring and tie it off. This will be how you hang it on the tree.
Attach a bow to the ribbon so the ribbon doesn't slide around. The bows I used had twisties on the back so it was easy to secure. I grabbed these bows at my local Hobby Lobby.
And that's it! This cute little ornament took all of 10 minutes to create and I just love it.
The jingle bells come from Amazon and you can get them in gold like I did or silver or even red! Great way to customize your jingle bell ornament.
For more fun DIY's make sure you head over to At Lane and High!
Comments
Join the conversation
-
I love this. Not only is it pretty,it sounds good too!
-
These little bell wreaths are adorable.
Frequently asked questions
Have a question about this project?
How many bells does it take for one ornament? Love how they turned out.
So pretty. How long of the wire should I cut? And how many bells did you use?