DIY Concrete Lamp Shade Light

9 Materials
$20
2 Hours
Easy
Steph had an idea to create a lamp that was totally made of concrete which included the lamp shade. It was an interesting idea but I couldn't quite grasp the concept. Actually, it wasn't until the lamp was finished and I saw how it was put together that I had the "ahh ha" moment!

With Steph's idea in her head, we set out to find suitable molds for the base and lamp. Target had everything we needed. We picked up a few styles of water in various sizes of bottles for the base and found two flower pots in different sizes that would be perfect in which to cast the shade.

​A trip to The Home Depot was all we needed to fill the remainder of our materials list!
Pots from target for casting the lamp shade
Cut a hole in the smaller pot and silicone a PVC cap halfway in the hole.
Mix concrete and add it to a plastic mold. We used a life water bottle with the top cut off. Add a PVC pipe in the middle and tap mold many times to remove air bubbles.
Mix concrete and add to the larger pot then add the smaller pot in the middle. Keep adding concrete and vibrate the mold to remove air bubbles.
After 24 hours, remove the molds.
Add an LED light strip to the inside of the shade.
Watch the video! We go through all the steps in more details and visit our website for a link to all the materials we used!
After

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Mother Daughter Projects
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

3 of 6 questions
  • Equ13024608 Equ13024608 on Aug 06, 2017
    Looks okay,but this is not for the home, and not even sure if its for the outside. What does this "lamp" weigh?

  • Mary Mary on Oct 03, 2017
    are the led lights solor power?

  • Lisa West Lisa West on May 02, 2019

    I wonder if this could be done with a normal light socket and wiring? To possible hang from a ceiling. The concrete would have to very thing about half inch or so as to not RIP wiring apart. It's most deffinatly fire proof. I like the idea. For those who feel it would fall over make a concrete plate for the bottom.

Comments

Join the conversation

4 of 55 comments
Next